Unbox And Buy

...vs the other way around...

Prowood Fingerboard Veneer (Make Your Own Fingerboards)
$12.00 - View on Amazon


From the Kasper Fejring channel:

Transcript from Kasper Fejring:

"Hi guys my name is Kasper Fejring, and in this video I will show how to make a fingerboard deck. So the things you will need to make the deck are veneer, a fb mold, wood glue, sand paper, a vice or clamp and a drilling machine with a 2 mm drill. Glue 4 or 5 pieces of veneer together, depending on how thick your veneer is. My veneer is about 0,5 mm thick, so I'm going to use 5 plies. If you want to make the deck a bit stronger, the direction of the grain should change 90 degrees from one ply to the next. Put the plies into the mold and clamp it very tight together. Let it dry for at least 12 hours before it's ready for demoulding. THE NEXT DAY Now you will need to draw the shape you want your deck to have, if you have an old fingerboard you can use it as a template.

Sand the deck into the shape you have drawn, it can take a pretty long time, so if you have a coping saw like me you can use that as well. When you have got the right shape, you will need to drill some holes for the trucks. You have to be careful and very precise to make sure that the holes will fit to the trucks. You should use either the trucks or an old fingerboard to mark the position of the holes. After drilling the holes you can chamfer them to make them fit the screws. Finally use some very fine sandpaper to make everything nice and smooth. If you liked this video please hit the like button down below and I will you guys in the next video. ..."


Description from Amazon: Each Veneer Pack includes 50 pieces of pre-cut veneer, measuring 4.25" x 1.5". This is enough to make ten five ply boards. This pack includes 30 pieces of Canadian Maple and 20 pieces of Cross-cut veneer.

Prowood Fingerboard Veneer (Make Your Own Fingerboards)
$12.00 - View on Amazon



About / Contact | Copyright © 2017 Unbox And Buy